Error code · Refrigerator

E7 on an Electrolux ICON Column Refrigerator: Stuck Key Alarm

Low risk · DIY check OK

Code: E7
Appliance: Refrigerator
Brand: Electrolux
Warranty: 30-day workmanship

What E7 means

On an Electrolux ICON built-in all-refrigerator column with the Custom Set control, such as the E32AR85PQS or EI32AR80QS, E7 is the stuck key alarm. The control has felt one key pressed for over 30 seconds. It beeps for as long as a minute, and the display swaps between E7 and 33 F. Until the key reads normally again, the column cools to a factory-set temperature, not to your own setting.

Common causes of E7

A touch key held down or stuck on the control
Moisture or grime pressing on the keypad
The control keypad itself

✓ One safe check you can try

1. Press ALARM OFF to quiet the beeping. 2. Gently wipe the keypad with a soft dry cloth and check that nothing leans on it. 3. Leave the control alone for a few minutes and watch the display. 4. If E7 appears again, call us.

! Why to stop there

If a key really is stuck, cleaning may not release it, and we test the keypad.
We confirm the unit holds its temperature while the alarm is active.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

LOC (Perfect Temp Drawer)Electrolux Perfect Temp Drawer Reads LOC OFFElectrolux ICON Column Refrigerator Reads OFF PFPF Light on an Electrolux Refrigerator After a Power Outage Power FailElectrolux ICON Column POWER FAIL Light: What It Reports SB / SbElectrolux Refrigerator Showing Sb: Sabbath Mode Door AjarDoor Ajar Alert on an Electrolux Refrigerator E8 / E9Electrolux ICON Column Refrigerator Shows E8 or E9: Sensor Alarm H / HIElectrolux Refrigerator Alarm: HI Is Blinking

E7E7 questions

Is my food safe with E7 showing?

The unit keeps running at its factory-set temperature, so food usually stays cold. Check with a thermometer if you are unsure, especially if the alarm has been on for a long time.

Why does the display alternate E7 and 33 F?

While the stuck key alarm is active, the display shows E7 and 33 F in turn. The unit holds a factory-set temperature until the key reading is cleared.

How do I stop the beeping from E7?

Press ALARM OFF. The alarm also stops by itself after one minute. If E7 returns after you leave the control alone, the keypad or the control needs to be tested.

Book a visit

Still unsure about E7?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150