Error code · Refrigerator

Electrolux Perfect Temp Drawer Reads LOC

Low risk · DIY check OK

Code: LOC (Perfect Temp Drawer)
Appliance: Refrigerator
Brand: Electrolux
Warranty: 30-day workmanship

What LOC (Perfect Temp Drawer) means

LOC on the Perfect Temp Drawer of an Electrolux side-by-side refrigerator, such as the EI26SS55GS or EW26SS65GS, means the drawer is in control lock mode. The drawer keeps cooling at the setting it had, but its keys will not change anything until you unlock them. This is a setting that was turned on with a key hold, not an error, and it needs no repair. It only matters if the lock will not cancel.

Common causes of LOC (Perfect Temp Drawer)

The control lock was turned on by a key hold
A key pressed during cleaning

✓ One safe check you can try

1. Hold the control lock key for three seconds. 2. Check that LOC disappears from the drawer display. 3. Try changing the drawer setting again. 4. If LOC stays or the keys do not respond, leave the drawer alone and call us.

! Why to stop there

If the keys do not respond after unlocking, we test the drawer control.
We check that the drawer display is steady.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

OFFElectrolux ICON Column Refrigerator Reads OFF PFPF Light on an Electrolux Refrigerator After a Power Outage Power FailElectrolux ICON Column POWER FAIL Light: What It Reports SB / SbElectrolux Refrigerator Showing Sb: Sabbath Mode E8 / E9Electrolux ICON Column Refrigerator Shows E8 or E9: Sensor Alarm H / HIElectrolux Refrigerator Alarm: HI Is Blinking HI°F (Perfect Temp Drawer)HI F on an Electrolux Perfect Temp Drawer After Start-Up or an Outage LO / ULLO and UL on an Electrolux ICON Column: Control Lock Messages

LOC (Perfect Temp Drawer)LOC (Perfect Temp Drawer) questions

Is LOC a problem on the Perfect Temp Drawer?

No. It tells you the drawer controls are locked. The drawer is working, and the lock only stops the keys from changing the setting until you cancel it.

Will the drawer still keep its temperature while locked?

It usually keeps its current setting. Locking only stops changes from the keys, so food in the drawer stays at the temperature you chose before it was locked.

How do I unlock the drawer?

Hold the control lock key for three seconds and LOC should leave the display. If the keys still do not respond after that, call us so we can test the drawer control.

Book a visit

Still unsure about LOC (Perfect Temp Drawer)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150