F93 Door Lock Trouble on an Electrolux Range
F93 is listed with F90, F91, F92 and F94 as a door lock issue in the owner guide for Electrolux ranges. It means the oven control did not see the door lock behave the way it…
- Code
- F93
- Appliance
- Range
- Brand
- Electrolux
- Warranty
- 30-day workmanship
What F93 means
F93 is listed with F90, F91, F92 and F94 as a door lock issue in the owner guide for Electrolux ranges. It means the oven control did not see the door lock behave the way it expected. You will see F93 on the oven display, and baking, broiling or cleaning may stop. The guide names one shared door lock issue for all five codes, so we pin down the exact cause by testing the lock circuit on your range.
Common causes of F93
- The door lock assembly
- Wiring and connectors to the lock
- The oven control board
1. Cut power to the range at the breaker for up to 30 seconds, then switch it on again. 2. Check the oven door for anything stuck near the latch or gasket. 3. Close the door firmly and see whether F93 returns when you start a bake. 4. If it comes back, stop using the oven and call us.
- A power reset only clears the message and cannot tell a worn lock from a loose connector, so we test both.
- We confirm what is wrong before ordering anything.
Other Range codes
Is F93 a serious problem?
It is not a safety alarm by itself, but a door that will not lock or unlock needs attention before you rely on the oven. We would rather check it than have it fail mid-recipe.
Do the codes F90 to F94 mean the same thing?
The owner guide lists them together as one door lock issue. We check the lock circuit on your oven to see which condition applies, instead of guessing from the number alone.
Can I run self-clean again after a reset?
We would skip self-clean until the lock has been checked. Cleaning uses high heat with the door locked, and a lock problem can leave the door stuck shut when you need it open.
Still seeing F93?
A technician diagnoses it on site and gives you the price in writing before any work starts.