Error code · Range

Electrolux Induction Range Codes 51 to 55 and 61 to 65: Inductor Temperature Sensors

High · stop use, call now

Code: 51-55 / 61-65
Appliance: Range
Brand: Electrolux
Warranty: 30-day workmanship

What 51-55 / 61-65 means

On Electrolux Wave-Touch induction built-in slide-in ranges, such as the EW30IS65JS and EW30IS6CJS, codes 51, 52, 54 and 55 mean an inductor temperature sensor has an open circuit at the left front, left rear, right rear or right front zone. Codes 61, 62, 64 and 65 mean the sensor reports the inductor as too hot, which can point to poor ventilation or a fan that is not moving air. This range has four zones, so there is no 53 or 63.

Common causes of 51-55 / 61-65

Inductor temperature sensor in the named zone
Cooling fan and ventilation around the induction housing
Sensor wiring and connector

✓ One safe check you can try

1. Shut the range's breaker off for half a minute and then turn it on again. 2. Make sure the front vents are clear and nothing is stored against the range. 3. Use flat cookware that matches the zone. 4. If any of these codes returns, stop using that zone and call us.

! Why to stop there

A 5x code is an open sensor circuit and a 6x code is a heat reading, so we test different things for each.
For 6x codes we check airflow and the cooling fan first, since heat is the concern.
You approve a written price before we replace anything, and our repair is covered for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

SAb / SbWhat SAb and Sb Mean on an Electrolux Range SFSF After a Power Outage in Sabbath Mode on an Electrolux Range F30Electrolux Range Code F30: Open Oven Temperature Probe F31Electrolux Range Code F31: Shorted Oven Temperature Probe F40 / F41Electrolux Range Codes F40 and F41: Cooktop Lockout F90Electrolux Range F90 Code: The Door Lock Motor Needs a Look F91Electrolux Range Shows F91 and the Door Will Not Lock Right F92F92 on an Electrolux Range: Door Lock Circuit Reading

51-55 / 61-6551-55 / 61-65 questions

How do I know which zone is affected?

The second digit points to the zone: 1 is left front, 2 is left rear, 4 is right rear and 5 is right front. There is no 3, because this range has four zones.

How do the 5x codes differ from the 6x codes?

A 5x code means the zone temperature sensor circuit is open. A 6x code means the sensor reads too hot. They have different causes, so we test them differently.

Is it safe to keep cooking?

If a 6x code is showing, the control found the zone too hot and shut it off for protection, so we suggest leaving it off. Other zones may work, but call us if they act oddly.

Book a visit

Still seeing 51-55 / 61-65?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150