Error code · Range Hood

Electrolux Glass-Touch Hood Display “Snd”: Beeper Setting

Low risk · DIY check OK

Code: Snd
Appliance: Range Hood
Brand: Electrolux
Warranty: 30-day workmanship

What Snd means

Snd appears on the display of Electrolux glass-touch hoods, such as the RH30WC60GS, RH36WC60GS, RH30WC40GS and RH36PC60GS, for about two seconds when you change the beeper setting. Holding the Light button for 5 seconds turns the audible signals on or off, and Snd confirms that the change was made. It is not an error code and nothing is wrong with the hood. It is just feedback from the control when you press and hold the light key.

Common causes of Snd

Light button held for 5 seconds
Beeper setting changed by accident while cleaning the panel
Touch panel responding to a damp cloth

✓ One safe check you can try

1. Hold the Light button for 5 seconds again if you want to switch the beeps back. 2. Wipe the glass panel with a soft dry cloth. 3. Avoid pressing the controls while you clean around them. 4. If the display keeps showing Snd or the controls act on their own, call us.

! Why to stop there

The message is a normal confirmation. If it repeats with no one touching the panel, we test the touch controls.
Moisture or grease on the glass can cause false touches, and we check for that.
Should the panel need a repair, you get the price in writing first, and our work is covered for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range Hood codes

CArEElectrolux Glass-Touch Hood Message "CArE": Heat Sensor Raised the Fan Charcoal FilterElectrolux Hood Message "Charcoal Filter": Time to Replace the Filters Grease FilterElectrolux Hood Message "Grease Filter": Washing Reminder Heat Sensor Auto Fan-OnElectrolux T-Shape Hood Heat Sensor: Fan Starts by Itself

SndSnd questions

What does Snd mean on my hood?

It confirms that you turned the audible signals on or off. It stays on the display for about two seconds, and then the normal display returns.

How do I stop the beeping?

Hold the Light button for 5 seconds. Snd flashes briefly to confirm the change. The same press turns the beeps back on later if you prefer them.

Why does Snd keep appearing?

Something may be touching the panel, such as a damp cloth or grease on the glass. If it repeats on a clean dry panel, we can check the touch controls.

Book a visit

Still unsure about Snd?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150