Error code · Wall Oven

Electrolux IQ-Touch Wall Oven: E Code Beeps and Display

Medium · inspection needed

Code: E (code)
Appliance: Wall Oven
Brand: Electrolux
Warranty: 30-day workmanship

What E (code) means

On the Electrolux IQ-Touch single wall oven EI30EW38TS, the oven control beeps and displays an F or E code when it detects an error condition. The owner document does not list individual E numbers, so what you see is a letter and a number the control chose. The message means the control found something it did not expect, and it may have stopped the bake or broil. Pressing OFF clears the message, and a repeat is what needs attention.

Common causes of E (code)

Temporary glitch in the oven control
Temperature sensor or its wiring
Control or touch panel if the code returns
Power supply to the control

✓ One safe check you can try

1. Press OFF to clear the code. 2. If the code repeats, turn the oven off at the breaker for five minutes. 3. Turn the power back on and set the clock. 4. Try a short bake. If the code appears again, write it down and call us.

! Why to stop there

A letter and number tell us the circuit that was affected, but not whether it is the sensor, the wiring or the control, so we read the code and test.
We check the oven for how it behaves after the clear.
You get a written price before we start, with a 30-day warranty on the work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F31Electrolux Wall Oven Code F31: Shorted Temperature Probe F9Electrolux Wall Oven Code F9: Door Lock Motor Condition F90-F94Electrolux Wall Oven Codes F90 to F94: Door Lock Problem HotElectrolux Wall Oven Message "Hot": Cooling Down Before the Door Opens PFElectrolux Wall Oven Code PF: Power Failure F25Electrolux Wall Oven Code F25: No Zero-Cross Signal on the Fan Board F26Electrolux Double Wall Oven Code F26: Lower Oven Select Signal Missing F3Electrolux Wall Oven Code F3: Probe or Safety Thermostat Condition

E (code)E (code) questions

Why does the oven beep and show a code?

The control found an error condition and signaled it with a beep and a letter and number. Pressing OFF clears it, and whether it returns tells us if it is a one-time event.

Can I keep using the oven if the code clears?

If it clears after you turn the power off for five minutes and does not return, you can. If it returns, stop and call us with the code you saw.

What should I tell you when I call?

Tell us the exact letter and number you saw and what the oven was doing, such as baking or broiling. That helps us find the cause.

Book a visit

Still seeing E (code)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150