Error code · Wall Oven

Electrolux Double Wall Oven Code F24: No Signal from the Lower Fan Board

Medium · inspection needed

Code: F24
Appliance: Wall Oven
Brand: Electrolux
Warranty: 30-day workmanship

What F24 means

On the 2007-generation Electrolux built-in wall ovens, including the EW30EW55GS, EW30EW65GS and EW27EW65GS, F24 is tied to the lower oven of a double wall oven. The control has lost communication with the board that runs the lower convection fan and oven lights. You will hear the control beep and see F24 on the display, and the lower oven may not heat. These ovens are many years old and common in Houston homes. We still repair them and will say honestly if the cost is not justified.

Common causes of F24

Wiring and connectors running to the lower fan and lights board
The lower convection fan and lights board
The oven control board

✓ One safe check you can try

1. Press any key on the control to see if F24 goes away. 2. If it remains, flip the oven's breaker off, wait half a minute and flip it on again. 3. Try the upper oven to see whether it behaves normally, and tell us what you find. 4. If F24 comes back, leave the lower oven off and call us.

! Why to stop there

The code points to the link with the lower board, not to a part that has been proven bad, so we test that connection before anything is replaced.
Whether the upper oven works normally helps us narrow down the circuit, and we check both.
You see the price on paper before we touch a board, and the repair is covered for 30 days afterward.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F90-F94Electrolux Wall Oven Codes F90 to F94: Door Lock Problem HotElectrolux Wall Oven Message "Hot": Cooling Down Before the Door Opens PFElectrolux Wall Oven Code PF: Power Failure F25Electrolux Wall Oven Code F25: No Zero-Cross Signal on the Fan Board F26Electrolux Double Wall Oven Code F26: Lower Oven Select Signal Missing F3Electrolux Wall Oven Code F3: Probe or Safety Thermostat Condition F30Electrolux Wall Oven Code F30: Open Temperature Probe F31Electrolux Wall Oven Code F31: Shorted Temperature Probe

F24F24 questions

Does F24 mean both ovens are down?

Not necessarily. The code refers to the lower oven's fan and lights board, so the upper oven may keep working. We still check the shared control before we call it.

Why does my oven only show F24 on a double oven?

Only a double wall oven has a lower fan and lights board to lose contact with. A single oven would not report this code. That is why single-oven models never display it.

Can I clear it myself for good?

Pressing a key or cutting power for 30 seconds can clear a passing glitch. If the code returns, the cause is still there and we need to trace it.

Book a visit

Still seeing F24?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150