Error code · Microwave

Electrolux Microwave Message CHILD LOCK ON: Control Panel Locked

Low risk · DIY check OK

Code: CHILD LOCK ON
Appliance: Microwave
Brand: Electrolux
Warranty: 30-day workmanship

What CHILD LOCK ON means

On Electrolux built-in microwave ovens in the 24, 27 and 30 inch trim sizes, and on the over-the-range microwaves, such as the EI24MO45IB and EI30MO45GS, CHILD LOCK ON appears when you touch a pad while the control panel is locked. The lock is a setting, not a failure. It was switched on with the user preference key, the number 1 and START, and the microwave ignores the pads until the lock is turned off.

Common causes of CHILD LOCK ON

Child lock turned on from the panel
Pad pressed by accident during cleaning
Control that keeps locking itself if it returns often

✓ One safe check you can try

1. Press the user pref pad. 2. Press STOP/CLEAR to cancel the lock. 3. Check that the message is gone, then set a short heating time to confirm the pads respond. 4. If CHILD LOCK ON comes back by itself, or the pads do not respond, call us.

! Why to stop there

The lock is a setting, so the open question is why it keeps turning on, and we test the pads for presses nobody made.
We check that the panel responds normally once it is unlocked.
You see a written price before any work, and we tell you if nothing needs repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

DEMO ONElectrolux Microwave Message DEMO ON: Demonstration Mode DURING DEMO NO OVEN POWERElectrolux OTR Convection Microwave: DURING DEMO NO OVEN POWER E-04Electrolux Microwave Code E-04: Sensor Cooking Did Not Finish ENJOY YOUR OVENElectrolux Microwave Message ENJOY YOUR OVEN: Power Was Restored ERRORElectrolux Microwave Message ERROR: Entry Not Accepted

CHILD LOCK ONCHILD LOCK ON questions

How do I turn the lock off?

Press the user pref pad, then STOP/CLEAR. The message should go away and the pads should respond again. If you want it back on, user pref, 1 and START sets it.

Does the message mean the microwave is broken?

No. It is the microwave telling you the panel is locked on purpose. It only becomes a repair issue if the lock returns on its own or the pads do not respond.

Why does it show when I wipe the panel?

Touching a pad while locked brings up the message, so a cleaning cloth can trigger it. It is harmless, but it tells you the lock is still active.

Book a visit

Still unsure about CHILD LOCK ON?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150