Error code · Microwave

Electrolux Microwave Message ENJOY YOUR OVEN: Power Was Restored

Low risk · DIY check OK

Code: ENJOY YOUR OVEN
Appliance: Microwave
Brand: Electrolux
Warranty: 30-day workmanship

What ENJOY YOUR OVEN means

ENJOY YOUR OVEN is a friendly message that appears on Electrolux built-in microwaves in the 24, 27 and 30 inch trim sizes and over-the-range microwaves, such as the EI24MO45IB, EI30MO45GS, EI30SM55JS and EW30MO55HS. It shows when the microwave is first plugged in, and from time to time after the power was cut off, since the stored program and the time of day were erased. It is not a failure. The oven is ready to use once you set the clock.

Common causes of ENJOY YOUR OVEN

First plug-in after installation
Power outage or tripped breaker
Loose plug or outlet if it repeats

✓ One safe check you can try

1. Press CLEAR to dismiss the message. 2. Set the clock to the correct time. 3. Run a short test heat with a cup of water. 4. If the message keeps coming back without an outage, check that the plug is firmly in, then call us.

! Why to stop there

The message is normal after power loss, so the only open question is whether the power keeps dropping out.
We check the plug, the outlet and the cord if it repeats.
We give a written price before work, and we tell you when nothing is wrong.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

CHILD LOCK ONElectrolux Microwave Message CHILD LOCK ON: Control Panel Locked DEMO ONElectrolux Microwave Message DEMO ON: Demonstration Mode DURING DEMO NO OVEN POWERElectrolux OTR Convection Microwave: DURING DEMO NO OVEN POWER E-04Electrolux Microwave Code E-04: Sensor Cooking Did Not Finish ERRORElectrolux Microwave Message ERROR: Entry Not Accepted

ENJOY YOUR OVENENJOY YOUR OVEN questions

Why do I see this message?

The microwave shows it when it is plugged in for the first time or after the power was off. It means the clock and any stored program were reset.

How do I get rid of it?

Press CLEAR and set the clock. The oven is then ready to use, and you do not need to do anything else unless you want to enter your own settings again.

Why does it keep coming back?

If it returns without an outage, the microwave may be losing power briefly through a loose plug or outlet. We can check the plug, the outlet and the cord for you.

Book a visit

Still unsure about ENJOY YOUR OVEN?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150