Electrolux OTR Convection Microwave: DURING DEMO NO OVEN POWER
On the Electrolux over-the-range convection microwave EI30BM55HS, the long message DURING DEMO NO OVEN POWER is the demo mode display. It tells you the oven is in demonstration mode, so the display and pads work, but…
- Code
- DURING DEMO NO OVEN POWER
- Appliance
- Microwave
- Brand
- Electrolux
- Warranty
- 30-day workmanship
What DURING DEMO NO OVEN POWER means
On the Electrolux over-the-range convection microwave EI30BM55HS, the long message DURING DEMO NO OVEN POWER is the demo mode display. It tells you the oven is in demonstration mode, so the display and pads work, but the oven makes no heat and no microwave power. It is a status message, not a failure. Owners usually find it when a new or reset microwave will not heat, and the message goes away once demo mode is turned off.
Common causes of DURING DEMO NO OVEN POWER
- Demo mode switched on from the panel
- Mode set during installation or after a reset
- Control that keeps going back to demo mode
1. Check that the message is on the display and the pads still respond. 2. Turn demo mode off using the steps in the owner guide for your microwave. 3. Unplug the microwave for a moment and plug it in again if the message stays. 4. Set the clock and test with a cup of water. If it returns, call us.
- Demo mode is a setting, so we need to learn how it was turned on and whether it comes back.
- We test the convection and microwave heating once the mode is off.
- You get a written price before work, and we tell you if the unit is fine.
Other Microwave codes
What does the long message mean?
It tells you the microwave is in demo mode, so the oven has no power. The display and pads still work, which is why the message is easy to mistake for a failure.
Will the oven heat after I clear it?
It should. Once demo mode is off, normal microwave and convection heating should return. If it still does not heat after that, it is a separate problem, and we test the heating system.
Is this the same as DEMO ON?
It is the same mode with a longer message on this convection model. Either way the oven has no heating power until demo mode is switched off, so the steps to clear it are the same.
Still unsure about DURING DEMO NO OVEN POWER?
A technician diagnoses it on site and gives you the price in writing before any work starts.