Error code · Range

Electrolux Range Code F13: Control Memory Checksum Error

Medium · inspection needed

Code: F13
Appliance: Range
Brand: Electrolux
Warranty: 30-day workmanship

What F13 means

F13 on Electrolux Wave-Touch and IQ-Touch freestanding and slide-in ranges, such as the EW30EF65GS, EW30ES65GS, EW30GS65GS, EI30EF55GS and EW30DF65GS, means the control's internal checksum may have been corrupted. Some owner guides call it an E prompt failure, and the related article calls it an EEPROM failure. In simple terms, the settings memory in the oven control cannot be trusted, so the oven stops. These older ranges are still in many Houston homes.

Common causes of F13

Oven control memory (EEPROM)
Oven control board
Power interruption that corrupted the settings

✓ One safe check you can try

1. Press any key to see whether the code clears. 2. Cut power to the range for half a minute at the plug or breaker, then restore it. 3. Think about whether a power outage or surge happened just before the code appeared. 4. If F13 returns, call us.

! Why to stop there

Corrupted memory usually points to the control board, but we check connections and power quality before saying so.
We tell you what we find in plain words.
The cost is written down before we start, and if the range is too old to justify it, we say so.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

SAb / SbWhat SAb and Sb Mean on an Electrolux Range SFSF After a Power Outage in Sabbath Mode on an Electrolux Range F90Electrolux Range F90 Code: The Door Lock Motor Needs a Look F91Electrolux Range Shows F91 and the Door Will Not Lock Right F92F92 on an Electrolux Range: Door Lock Circuit Reading F93F93 Door Lock Trouble on an Electrolux Range F94Electrolux Range Error F94 - Door Lock Not Responding HEWhy Your Electrolux Induction Cooktop Says HE

F13F13 questions

Is F13 the same as an EEPROM error?

Yes. The control stores its settings in an EEPROM, and F13 reports that the check on that memory did not pass. Different owner guides use different names for it.

Could a power surge cause F13?

It can. A surge or outage may corrupt the saved settings. We ask about recent power events when we diagnose it, because it helps us pick the right fix.

Will resetting the power help?

Sometimes it clears a temporary error. If F13 returns after the 30-second power-off, the control is likely holding bad data, and we test it before suggesting a part.

Book a visit

Still seeing F13?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150