Booking today · Houston arrival windows 9–12 · 1–4 · 4–7 Independent Electrolux specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 979-9150 Request a Service Visit
Error code · Dishwasher

Electrolux Dishwasher Code iC0: Display Not Communicating

The iC0 code on Electrolux ICON dishwashers such as the EI24ID50QS and EW24ID70QT means the main control cannot recognize the display board. The two boards stopped talking to each other, so the dishwasher lacks a working…

High · stop use, call now
Request a Service Visit(713) 979-9150
Code
iC0
Appliance
Dishwasher
Brand
Electrolux
Warranty
30-day workmanship

What iC0 means

The iC0 code on Electrolux ICON dishwashers such as the EI24ID50QS and EW24ID70QT means the main control cannot recognize the display board. The two boards stopped talking to each other, so the dishwasher lacks a working control system. The buttons may not respond, the display may go blank or garbled, and the dishwasher will probably not run.

Common causes of iC0

  • Cable between the display and the control
  • Display board
  • Main control board
  • Power supply to the control boards
✓ One safe check you can try

1. Press Cancel and look at the display for any response to the buttons. 2. Make sure the door is fully closed and latched. 3. Do not open panels or unplug anything. 4. If iC0 returns or the display stays dark, call us.

! Why to stop there
  • We determine whether the display board, the cable or the main board is the weak point before ordering parts.
  • We test the supply to the control boards.
  • You approve a written price before work, and the repair has a 30-day warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

PRESS STARTElectrolux Dishwasher Message PRESS START: Close the Door iE0Electrolux Dishwasher Code iE0: Spray Arm Level Not Reached iF0Electrolux Dishwasher Code iF0: Overfilling iF1Electrolux Dishwasher Code iF1: Water Level Too High L4 / L5 flash pattern (no-display models)Electrolux Dishwasher L4 and L5 Light Flashes: Reading the Code LOCElectrolux Dishwasher Message LOC: Controls Locked PFElectrolux Dishwasher Message PF: Power Was Interrupted i60Electrolux Dishwasher Code i60: Water Not Heating Up
iC0iC0 questions
Is the dishwasher dead?

It may look dead, but usually one connection or board is the problem. The tub, pumps and motors are often fine.

Will pressing Cancel help?

It can clear a one-time glitch on the display. If iC0 returns, the communication path or a board needs service.

Is this repair worth it on an older dishwasher?

Often yes, because boards are a contained repair. We say plainly when the cost is not worth it for your unit.

Book a visit

Still seeing iC0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150
☎ Call our office ▤ Request a Service Visit