Booking today · Houston arrival windows 9–12 · 1–4 · 4–7 Independent Electrolux specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 979-9150 Request a Service Visit
Error code · Dishwasher

Electrolux Dishwasher Code i61: Water Too Hot

This Electrolux ICON dishwasher message, seen on models such as the EI24CD35RS and EW24ID80QS, means the water temperature went above 78 degrees Celsius, about 172 degrees Fahrenheit. The control stops the cycle to protect the tub…

High · stop use, call now
Request a Service Visit(713) 979-9150
Code
i61
Appliance
Dishwasher
Brand
Electrolux
Warranty
30-day workmanship

What i61 means

This Electrolux ICON dishwasher message, seen on models such as the EI24CD35RS and EW24ID80QS, means the water temperature went above 78 degrees Celsius, about 172 degrees Fahrenheit. The control stops the cycle to protect the tub and the plastic parts inside. The tub and the door may feel hotter than normal, and the dishes inside may be too hot to handle.

Common causes of i61

  • Temperature sensor misreading
  • Heater staying on
  • Control relay for the heater
  • Wash pump not moving water over the heater
✓ One safe check you can try

1. Press Cancel and open the door carefully, since steam and hot dishes can burn. 2. Let the dishwasher cool with the door open until the tub is no longer hot. 3. Make sure the spray arms are free and the filter is clean. 4. Run a short cycle. If i61 shows again, turn the dishwasher off at its breaker and call us.

! Why to stop there
  • Overheating means either a real heat problem or a wrong reading, and we test the sensor and the heater circuit.
  • We check that water is circulating normally during the heated step.
  • We tell you the price in writing first and wait for your approval.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

PRESS STARTElectrolux Dishwasher Message PRESS START: Close the Door i70Electrolux Dishwasher Code i70: Temperature Sensor Out of Range i80 / i81Electrolux Dishwasher Codes i80 and i81: Automatic Door Opener i90Electrolux Dishwasher Code i90: Control Memory or Display Data Error iB0Electrolux Dishwasher Code iB0: Sensor Calibration Not Finished iC0Electrolux Dishwasher Code iC0: Display Not Communicating iC1 / iC2Electrolux Dishwasher Codes iC1 and iC2: Internal Communication iC3Electrolux Dishwasher Code iC3: Power and Motor Boards Not Talking
i61i61 questions
Is i61 dangerous?

The dishwasher stopped on purpose, so the safety response worked. Still, repeated overheating can damage the tub and plastic parts, so please do not keep restarting it.

Why is the door hot?

The tub was heated more than intended. Give it time to cool before you open it fully or unload.

Can a clogged filter cause it?

A blocked filter or arm reduces circulation, which can make heat build in one spot. Cleaning them is a sensible first check.

Book a visit

Still seeing i61?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150
☎ Call our office ▤ Request a Service Visit