Error code · Dishwasher

Electrolux Dishwasher Message PF: Power Was Interrupted

Low risk · DIY check OK

Code: PF
Appliance: Dishwasher
Brand: Electrolux
Warranty: 30-day workmanship

What PF means

PF is a power-loss message on Electrolux built-in dishwashers with the ICON control, such as the EI24ID50QS and EW24ID80QS, and on the EWDW6505G and EIDW6305G. It appears when the dishwasher is first installed or when power to it was interrupted, for example by a storm, a tripped breaker or a short outage. On older panels the HI-TEMP WASH, SANITIZE and START/CANCEL lights flash together. It is a notice, not a broken part.

Common causes of PF

Power interruption to the dishwasher
Breaker or outlet that trips now and then
Loose supply connection

✓ One safe check you can try

1. Press START/CANCEL to clear the message. 2. Select your cycle again and start a new one. 3. If PF keeps appearing without a power outage, note how often it happens and whether other appliances on the circuit lose power too. 4. Call us if it repeats.

! Why to stop there

If PF returns with no outage, something is cutting power to the dishwasher, and we check the supply and the control.
We look at the connection that feeds the dishwasher.
You see a written price before we begin, and the work has a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

PRESS STARTElectrolux Dishwasher Message PRESS START: Close the Door L4 / L5 flash pattern (no-display models)Electrolux Dishwasher L4 and L5 Light Flashes: Reading the Code LOCElectrolux Dishwasher Message LOC: Controls Locked i60Electrolux Dishwasher Code i60: Water Not Heating Up i61Electrolux Dishwasher Code i61: Water Too Hot i70Electrolux Dishwasher Code i70: Temperature Sensor Out of Range i80 / i81Electrolux Dishwasher Codes i80 and i81: Automatic Door Opener i90Electrolux Dishwasher Code i90: Control Memory or Display Data Error

PFPF questions

Does PF mean I need a repair?

Not after a one-time outage. Press START/CANCEL and run the cycle again. A repair only comes into play if PF keeps showing up.

Why are three lights flashing?

On older panels the flashing HI-TEMP WASH, SANITIZE and START/CANCEL lights are how the dishwasher shows loss of power. Pressing START/CANCEL stops them.

Will I lose the cycle I was running?

Yes, the interrupted cycle does not resume on its own. You start a new one after clearing the message.

Book a visit

Still unsure about PF?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150