Error code · Wall Oven

Electrolux Wall Oven Message DEMO: Demo Mode Is on

On Electrolux wall ovens with a settings menu, such as the ECWS3011AS and ECWD3012AS, DEMO tells you the oven is in demo mode. The display and controls work as usual, but the oven does not heat,…

Low risk · DIY check OK

(713) 979-9150

Code: DEMO
Appliance: Wall Oven
Brand: Electrolux
Warranty: 30-day workmanship

What DEMO means

On Electrolux wall ovens with a settings menu, such as the ECWS3011AS and ECWD3012AS, DEMO tells you the oven is in demo mode. The display and controls work as usual, but the oven does not heat, which makes it look as though the oven has stopped working. The mode is meant for showing the controls, and it is switched on and off from the settings menu. It does not point to a failed part.

Common causes of DEMO

Demo mode turned on in the settings menu
Mode set during installation
Control that returns to demo mode

✓ One safe check you can try

1. Turn the oven's breaker off and wait 45 seconds. 2. Turn the breaker back on. 3. Open the settings menu and turn demo mode off. 4. Start a bake cycle and confirm the oven heats. If DEMO returns, call us.

! Why to stop there

Demo mode is a setting, so the open question is how it got turned on and whether it comes back.
We test that the oven heats once the mode is off.
You see a written price before work, and we tell you if the oven is fine.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

PFElectrolux Wall Oven Code PF: Power Failure F25Electrolux Wall Oven Code F25: No Zero-Cross Signal on the Fan Board F26Electrolux Double Wall Oven Code F26: Lower Oven Select Signal Missing F3Electrolux Wall Oven Code F3: Probe or Safety Thermostat Condition F30Electrolux Wall Oven Code F30: Open Temperature Probe F31Electrolux Wall Oven Code F31: Shorted Temperature Probe F9Electrolux Wall Oven Code F9: Door Lock Motor Condition F90-F94Electrolux Wall Oven Codes F90 to F94: Door Lock Problem

DEMODEMO questions

Why does my oven not heat?

In demo mode the display and controls work, but the oven does not heat. The DEMO message is the sign, and turning the mode off restores heating.

How do I turn demo mode off?

Turn the breaker off for 45 seconds, turn it back on, then use the settings menu to switch demo mode off. Do this at the breaker, not by taking the oven apart.

Is DEMO a sign of a failure?

No. It is a mode, not a failure. If the oven still does not heat after demo is off, that is a separate problem we can test.

Book a visit

Still unsure about DEMO?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150