Error code · Wall Oven

Electrolux Wall Oven Codes F90 to F94: Door Lock Problem

Medium · inspection needed

Code: F90-F94
Appliance: Wall Oven
Brand: Electrolux
Warranty: 30-day workmanship

What F90-F94 means

On the current touch-screen Electrolux wall ovens, such as the ECWS3011AS and ECWD3012AS, the F90 through F94 codes mean a door lock issue. The screen asks you to press UNLOCK and follow its prompts to get a code that releases the doors and the controls. On the older 2007 wall ovens, only F90 is used, and it points to the door motor mechanism. In both cases the oven may not run or the door may stay locked until the lock is dealt with.

Common causes of F90-F94

Door latch motor and mechanism
Latch position switch and wiring
Oven control board

✓ One safe check you can try

1. Press UNLOCK on the screen and follow the prompts to get the unlock code. 2. If the screen does not respond, switch the oven's breaker off for up to half a minute, then switch it back on. 3. Let the oven cool before you touch the door. 4. If the code returns, call us.

! Why to stop there

The codes tell us the lock did not behave, not which part inside it is responsible, so we test the latch, its switch and the control.
We check the door for damage or misalignment too.
We explain the cost on paper before any repair, and our workmanship is covered for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F25Electrolux Wall Oven Code F25: No Zero-Cross Signal on the Fan Board F26Electrolux Double Wall Oven Code F26: Lower Oven Select Signal Missing F3Electrolux Wall Oven Code F3: Probe or Safety Thermostat Condition F30Electrolux Wall Oven Code F30: Open Temperature Probe F31Electrolux Wall Oven Code F31: Shorted Temperature Probe F9Electrolux Wall Oven Code F9: Door Lock Motor Condition HotElectrolux Wall Oven Message "Hot": Cooling Down Before the Door Opens PFElectrolux Wall Oven Code PF: Power Failure

F90-F94F90-F94 questions

What does the UNLOCK prompt do?

It walks you through steps that release the doors and the controls so you can get back into the oven. It does not repair the lock itself.

Why are there five codes?

The current touch-screen ovens use F90 to F94 for the same lock problem, so we treat them as one family and check the lock for any of them.

Will it come back?

It can if the lock mechanism is worn. If it returns after you unlock the door, that is the time to call us. We check the latch and its switch so the lock stays reliable.

Book a visit

Still seeing F90-F94?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150