Error code · Cooktop

Electrolux Induction Cooktop Code F: Pan Not Detected

Low risk · DIY check OK

Code: F
Appliance: Cooktop
Brand: Electrolux
Warranty: 30-day workmanship

What F means

An F in a cooking zone LED on Electrolux induction cooktops, including the ICON E36IC75FSS and E30IC75FSS and the Wave-Touch EW30IC60LS, means the cooktop does not see suitable cookware on that zone. The pan may not be magnetic, may be too small for the zone, or may have been lifted off while the zone was still on. With no suitable pan sensed, the zone does not heat, and F stays lit until you fix the cookware or turn the zone off.

Common causes of F

Cookware that is not magnetic
A pan too small for the zone
Pan removed while the zone stayed on
Pan detection circuit for the zone

✓ One safe check you can try

1. Hold a magnet to the bottom of the pan. If it does not stick firmly, induction cannot heat that pan. 2. Use a pan that covers a good part of the zone ring. 3. If you lifted the pan, turn the zone off and set it back down before restarting. 4. If a known good pan still shows F, call us.

! Why to stop there

If a magnet-tested pan of the right size still shows F, the pan detection circuit for the zone needs a test.
We check whether F shows on all zones or only one, which tells us where the problem is.
We tell you the price in writing before replacing a board.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

HEElectrolux Cooktop Code HE: Hot Element Warning Sb / SFElectrolux IQ-Touch Cooktop Codes Sb and SF: Sabbath Mode E - XXElectrolux Wave-Touch Cooktop Code E - XX: Timer Display Error E XX (hybrid)Electrolux Wave-Touch Hybrid Cooktop Code E XX: Zone Lights Plus Timer Digits E0 XXElectrolux ICON Induction Cooktop Code E0 XX: Two-Zone Error Readout ErElectrolux Knob Cooktop Code Er: A Knob Is Still on F XXElectrolux ICON Electric Cooktop Code F XX: Error Letter Plus Digits HElectrolux ICON Induction Cooktop Code H: Zone Still Hot

FF questions

Why does my pan not work on induction?

Induction only heats cookware a magnet sticks to, such as cast iron and many stainless pans. Aluminum and glass will show F. If a magnet does not stick firmly to the bottom of the pan, the cooktop will not heat it, and F is the cooktop telling you so.

Does the pan size matter?

Yes. A pan that is too small for the zone may not be detected, so F appears. Match the pan to the zone ring. Very small pans can sit on the zone without being sensed, so move to a smaller ring or a larger pan before you suspect the cooktop.

What if every pan shows F?

Then the detection circuit may not be reading. We test it and tell you whether the repair makes sense for your cooktop. If every pan fails on every zone, the cooktop is probably not sensing correctly, and that is a repair we can test.

Book a visit

Still unsure about F?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150