Error code · Cooktop

Electrolux ICON Induction Cooktop Code E0 XX: Two-Zone Error Readout

Medium · inspection needed

Code: E0 XX
Appliance: Cooktop
Brand: Electrolux
Warranty: 30-day workmanship

What E0 XX means

The Electrolux ICON induction cooktops E30IC80ISS and E36IC80ISS show an error as E0 in one zone display, with a two-digit number in another zone display. The two parts read together as a single code, so both pieces matter. The number identifies what the cooktop recorded, and the cooktop may stop heating the zones that depend on it until the error is cleared.

Common causes of E0 XX

Induction module circuit named by the number
Control and touch panel connection
Generator board or its link
Supply voltage reaching the cooktop

✓ One safe check you can try

1. Check that all zones are off and the surface has cooled. 2. Cycle the cooktop's power supply, off and then on. 3. If the display returns, write down the E0 and the two digits exactly. 4. Call us with the number and the zone positions that showed it.

! Why to stop there

A power cycle cannot show what the recorded number refers to, so we use the digits to pick the circuit to test.
We confirm by testing before replacing any board, because several different circuits can share the same readout style.
Our repair price is given in writing first, and our workmanship warranty lasts 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

HEElectrolux Cooktop Code HE: Hot Element Warning Sb / SFElectrolux IQ-Touch Cooktop Codes Sb and SF: Sabbath Mode ErElectrolux Knob Cooktop Code Er: A Knob Is Still on FElectrolux Induction Cooktop Code F: Pan Not Detected F XXElectrolux ICON Electric Cooktop Code F XX: Error Letter Plus Digits HElectrolux ICON Induction Cooktop Code H: Zone Still Hot E 61-E 65Electrolux ICON Induction Cooktop Codes E 61 to E 65: Zone Sensor Too Hot E 71Electrolux ICON Induction Cooktop Code E 71: Generator Timing Lost

E0 XXE0 XX questions

Why are the numbers split across two zones?

The cooktop uses its zone displays to show the full code. Read the E0 from one zone and the digits from the other. For example, you might see E0 in one zone and the two digits in the next, and we need both parts to know which code it is.

Does E0 mean the same as E alone?

E0 is how these two cooktop models label the start of the code. The two digits tell us the actual error. The two digits after E0 are the useful part, so write them down exactly as they appear and give them to us when you call.

Should I call right away?

If the code comes back after a power cycle, yes. Please have the digits ready, since they decide what we bring. With the digits in hand we can usually come prepared, and we tell you the price in writing once we have tested the cooktop.

Book a visit

Still seeing E0 XX?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150