Error code · Cooktop

Electrolux ICON Induction Cooktop Codes E 61 to E 65: Zone Sensor Too Hot

Medium · inspection needed

Code: E 61-E 65
Appliance: Cooktop
Brand: Electrolux
Warranty: 30-day workmanship

What E 61-E 65 means

The range E 61 through E 65 on an Electrolux ICON 36-inch induction cooktop, such as the E36IC75FSS, means the temperature sensor under a cooking zone is reporting a temperature that is too hot. Each number in the range belongs to one zone. The control cuts power to that zone so it cannot keep climbing, and you see the number shown on the display. The reading might be real heat or a sensor circuit giving a false one.

Common causes of E 61-E 65

A genuinely overheated pan or empty cookware
Sensor reading falsely high
Wiring or connector affecting the sensor signal
Module input reading the sensor

✓ One safe check you can try

1. Turn every zone off and move any pan away from the glass. 2. Let the cooktop cool fully before you touch it. 3. Once it is cold, power the cooktop off and on at its supply. 4. If the number returns when the cooktop is cold, stop using the zone and call us.

! Why to stop there

A reset cannot tell a real overheat from a wrong sensor reading, so we compare the sensor reading against the actual glass temperature.
If the reading is wrong with a cold cooktop, we test the sensor and wire instead of replacing the module.
We give you the price in writing before work, and the repair is covered by a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

Sb / SFElectrolux IQ-Touch Cooktop Codes Sb and SF: Sabbath Mode HEElectrolux Cooktop Code HE: Hot Element Warning E 71Electrolux ICON Induction Cooktop Code E 71: Generator Timing Lost E 74Electrolux ICON Induction Cooktop Code E 74: Generator Link Error E 76 / E 77Electrolux ICON Induction Cooktop Code E 76 / E 77: Communication or Heat Sink Sensor E - XXElectrolux Wave-Touch Cooktop Code E - XX: Timer Display Error E XX (hybrid)Electrolux Wave-Touch Hybrid Cooktop Code E XX: Zone Lights Plus Timer Digits E0 XXElectrolux ICON Induction Cooktop Code E0 XX: Two-Zone Error Readout

E 61-E 65E 61-E 65 questions

Could my cookware have caused this?

Yes, an empty or very thin pan can overheat a zone fast. If the number appears when cooking only with a dry pan, that is likely the reason.

What if it shows with a cold cooktop?

That points us to the sensor circuit giving a false reading. Please tell us the cooktop was cold when it appeared. A cold cooktop showing this number suggests a wrong reading instead of real heat, and we test the sensor to prove it.

Is it dangerous?

The control shuts the zone off to protect itself, which is the safe response. We still suggest waiting for the glass to cool before anyone touches it.

Book a visit

Still seeing E 61-E 65?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150