Error code · Cooktop

Electrolux ICON Induction Cooktop Code E 35 / E 75: AC Input Too Low

High · stop use, call now

Code: E 35 / E 75
Appliance: Cooktop
Brand: Electrolux
Warranty: 30-day workmanship

What E 35 / E 75 means

On Electrolux ICON 36-inch induction cooktops, including the E36IC75FSS, E 35 and E 75 mean the AC voltage reaching the induction electronics is too low. The cooktop would rather stop than run its coils on weak power, so the affected zones shut down and the number shows. It is the opposite condition to the high-voltage numbers, and both E 35 and E 75 describe the same low-voltage finding.

Common causes of E 35 / E 75

Low line voltage at the cooktop
Loose or corroded supply connection at the cooktop
Breaker or wiring in the circuit feeding it
Filter board input stage

✓ One safe check you can try

1. Turn all zones off and leave the glass to cool. 2. After a short pause, turn the cooktop's power supply off and on. 3. If the number returns, note whether lights dimmed or other appliances were running at that moment. 4. Call us with the number and that note.

! Why to stop there

Low voltage may be a supply issue rather than a cooktop part, so we measure at the cooktop connection first.
If the supply is healthy, we test the filter board input stage for a reading that is wrong.
If the cause turns out to be house wiring, we say so, and you are not charged for a cooktop part you do not need.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

HEElectrolux Cooktop Code HE: Hot Element Warning Sb / SFElectrolux IQ-Touch Cooktop Codes Sb and SF: Sabbath Mode F XXElectrolux ICON Electric Cooktop Code F XX: Error Letter Plus Digits HElectrolux ICON Induction Cooktop Code H: Zone Still Hot E 61-E 65Electrolux ICON Induction Cooktop Codes E 61 to E 65: Zone Sensor Too Hot E 71Electrolux ICON Induction Cooktop Code E 71: Generator Timing Lost E 74Electrolux ICON Induction Cooktop Code E 74: Generator Link Error E 76 / E 77Electrolux ICON Induction Cooktop Code E 76 / E 77: Communication or Heat Sink Sensor

E 35 / E 75E 35 / E 75 questions

Can another appliance cause this?

Yes, a heavy load on the same circuit or a weak connection can pull the voltage down. Noting what else was running helps us. An air conditioner or an electric dryer starting up on the same circuit can drag the voltage down for a moment.

Is E 35 worse than E 75?

No, they carry the same meaning. We treat them as one voltage condition. Either number shows the same low-voltage finding, and we do not treat one as more serious than the other when we test.

Will an electrician be needed?

Sometimes the fix is on the house side, and we tell you plainly if that is the case so you can call the right trade.

Book a visit

Still seeing E 35 / E 75?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150