Booking today · Houston arrival windows 9–12 · 1–4 · 4–7 Independent Electrolux specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 979-9150 Request a Service Visit
Error code · Dishwasher

Electrolux Dishwasher Code CL / Cd: Door Not Latched

On Electrolux built-in dishwashers of the Durham platform, which show the iXY style codes, CL or Cd means the door has not closed and latched successfully. This covers the ICON, EI24CD35, EI24ID30, EI24ID50, EW24ID70 and EW24ID80…

Low risk · DIY check OK
Request a Service Visit(713) 979-9150
Code
CL / Cd
Appliance
Dishwasher
Brand
Electrolux
Warranty
30-day workmanship

What CL / Cd means

On Electrolux built-in dishwashers of the Durham platform, which show the iXY style codes, CL or Cd means the door has not closed and latched successfully. This covers the ICON, EI24CD35, EI24ID30, EI24ID50, EW24ID70 and EW24ID80 models, and the status window on the EWDW6505G and EIDW6305G. On the older EWDW6505G style control, CL flashes after you start a cycle and also if the door is opened during a wash. The dishwasher will not run until the latch is made.

Common causes of CL / Cd

  • Door not pushed fully closed
  • Dish rack or item blocking the door
  • Door latch not catching
  • Door switch not signaling closed
✓ One safe check you can try

1. Open the door and check that nothing, such as a dish or the lower rack, sticks out and blocks it. 2. Close the door firmly until you hear and feel it latch. 3. Press start again. 4. If it cannot be closed or the code stays, call us.

! Why to stop there
  • If the door shuts firmly and CL still shows, the latch or door switch may not be reporting closed, so we test them.
  • We look at the door hinge and spring for wear that stops the latch from catching.
  • You get the price in writing before any work.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

PRESS STARTElectrolux Dishwasher Message PRESS START: Close the Door iB0Electrolux Dishwasher Code iB0: Sensor Calibration Not Finished iC0Electrolux Dishwasher Code iC0: Display Not Communicating iC1 / iC2Electrolux Dishwasher Codes iC1 and iC2: Internal Communication iC3Electrolux Dishwasher Code iC3: Power and Motor Boards Not Talking iD0 / iD1Electrolux Dishwasher Codes iD0 and iD1: Motor Speed Signal Missing iE0Electrolux Dishwasher Code iE0: Spray Arm Level Not Reached iF0Electrolux Dishwasher Code iF0: Overfilling
CL / CdCL / Cd questions
Why does CL appear mid-cycle?

If the door is opened during a wash, the dishwasher stops and shows CL. Close the door and restart. Opening the door during a wash stops the cycle by design, so after closing it firmly you can press start again to continue.

What if the door will not shut?

Something may be blocking it, or the latch may be worn. Check the racks first, then call us. A rack that has slid out of position or a dish sticking out of the bottom is the most common reason a door will not latch.

Is Cd different from CL?

On these models they carry the same meaning. We treat them as one door condition. CL and Cd both tell you the door has not latched properly, so the same simple checks and the same latch and switch tests apply.

Book a visit

Still unsure about CL / Cd?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150
☎ Call our office ▤ Request a Service Visit