Electrolux Dishwasher Code i41: No Pressure Sensor Signal
On Electrolux built-in dishwashers of the Durham platform, the ICON, EI24CD35, EI24ID30, EI24ID50, EW24ID70 and EW24ID80 models, i41 means the control is getting no signal from the pressure sensor for more than a second, so the…
- Code
- i41
- Appliance
- Dishwasher
- Brand
- Electrolux
- Warranty
- 30-day workmanship
What i41 means
On Electrolux built-in dishwashers of the Durham platform, the ICON, EI24CD35, EI24ID30, EI24ID50, EW24ID70 and EW24ID80 models, i41 means the control is getting no signal from the pressure sensor for more than a second, so the program is aborted. The pressure sensor tells the dishwasher how much water is in the tub. Without that reading, the control cannot fill, wash or drain correctly, so it stops the cycle and shows i41.
Common causes of i41
- Pressure sensor not sending a signal
- Sensor harness or connector loose
- Sensor hose blocked
- Control board input for the sensor
1. Open the door and clean the filter and glass trap by hand. 2. Check that nothing blocks the sump. 3. Close the door and start a short cycle. 4. If i41 returns, write down when in the cycle it appears and call us.
- i41 tells us the signal is missing, so we test the sensor, its harness and the control input.
- We check the sensor hose, since a blockage can mimic a missing signal.
- We tell you the price in writing, and the repair is covered by a 30-day workmanship warranty.
Other Dishwasher codes
What does the pressure sensor do?
It measures the water level in the tub. The control uses it to decide when to fill, wash and drain. It measures the water level in the tub, and the control uses that reading to decide when to fill, when to wash and when to drain.
Is i41 the same as i40?
They are neighbors. i40 points to a clog, while i41 means the signal is missing. Both are checked together. They are neighbors in the same family, where i40 points to a clog and i41 means the signal is missing, so we check them together.
Can I fix it myself?
Cleaning the filter is safe. Sensor and harness checks mean opening the dishwasher, so we do those. Cleaning the filter is safe for you to do, but sensor and harness checks mean opening the dishwasher, which is work we do.
Still seeing i41?
A technician diagnoses it on site and gives you the price in writing before any work starts.