Error code · Range

Electrolux Induction Range Code 15: Surface Control Self-Test Failed

High · stop use, call now

Code: 15
Appliance: Range
Brand: Electrolux
Warranty: 30-day workmanship

What 15 means

On Electrolux Wave-Touch induction built-in slide-in ranges, such as the EW30IS65JS and EW30IS6CJS, code 15 on the cooktop means the surface control, called the ESEC, failed its self-test. The test looks at the wiring harness and the board that connects to the cooktop touch controls. If the oven shows F15 at the same time, the safety thermostat in the front console has opened. The cooktop may not heat while the code is showing.

Common causes of 15

Wiring harness between the surface control and its user interface board
ESEC user interface board
Front console safety thermostat if F15 also shows

✓ One safe check you can try

1. Note whether the oven shows F15 at the same time and tell us. 2. Make sure nothing is blocking the vents at the front of the range. 3. Cut power to the range at the panel for half a minute and then restore it. 4. If 15 returns, stop using the cooktop and call us.

! Why to stop there

The self-test fails for more than one reason, so we trace the harness first and the board after that.
If the console safety thermostat opened, we look for a cooling problem that caused it.
Before a board is ordered, we give you the price in writing, and we tell you if the range is not worth the cost.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

SFSF After a Power Outage in Sabbath Mode on an Electrolux Range SAb / SbWhat SAb and Sb Mean on an Electrolux Range F30Electrolux Range Code F30: Open Oven Temperature Probe F31Electrolux Range Code F31: Shorted Oven Temperature Probe F40 / F41Electrolux Range Codes F40 and F41: Cooktop Lockout F90Electrolux Range F90 Code: The Door Lock Motor Needs a Look F91Electrolux Range Shows F91 and the Door Will Not Lock Right F92F92 on an Electrolux Range: Door Lock Circuit Reading

1515 questions

What does it mean when F15 shows with code 15?

It means the safety thermostat in the front console opened, which usually points to heat in the console. We check the cooling fan and airflow, as well as the control.

Is it safe to keep cooking?

We would not. A failed self-test means the surface control cannot confirm itself, so it is better to leave the range off until we have checked it.

Can this be repaired on an older range?

Often yes. We start with the harness, which is the most economical item, and tell you plainly if a board is needed and whether it is worth the cost.

Book a visit

Still seeing 15?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150