Error code · Range

Electrolux Range Code F10: Possible Runaway Oven Temperature

High · stop use, call now

Code: F10
Appliance: Range
Brand: Electrolux
Warranty: 30-day workmanship

What F10 means

F10 is a safety code on Electrolux Wave-Touch and IQ-Touch ranges, freestanding or slide-in, that have the electronic oven control, including the EW30EF65GS, EW30ES65GS, EW30GS65GS, EI30EF55GS and EW30DF65GS. The control displays it when it senses a possible runaway oven condition. That means the oven may be heating beyond what it should, caused by a shorted relay or a bad temperature sensor. The control shuts the oven down for safety. Plenty of these ranges are still cooking in Houston kitchens, and repairing them is part of our regular work.

Common causes of F10

Oven temperature sensor (RTD) reading incorrectly
Oven relay that is stuck on
Oven control board

✓ One safe check you can try

1. Switch the oven off, keep the door shut and let it cool. 2. Disconnect the range for up to half a minute, at the plug or at the breaker, then reconnect it. 3. If F10 returns, do not run the oven again until we have checked it. 4. On a gas range, if you smell gas, go outside right away and call the gas utility from there.

! Why to stop there

F10 is a protective shutdown and does not name the sensor or the relay as the cause, so we test both of them.
We check the sensor reading against the actual oven temperature before we replace anything.
Before we order a single part, you get the repair quote in writing, and the finished work is guaranteed for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

SAb / SbWhat SAb and Sb Mean on an Electrolux Range SFSF After a Power Outage in Sabbath Mode on an Electrolux Range F90Electrolux Range F90 Code: The Door Lock Motor Needs a Look F91Electrolux Range Shows F91 and the Door Will Not Lock Right F92F92 on an Electrolux Range: Door Lock Circuit Reading F93F93 Door Lock Trouble on an Electrolux Range F94Electrolux Range Error F94 - Door Lock Not Responding HEWhy Your Electrolux Induction Cooktop Says HE

F10F10 questions

Is F10 dangerous?

It is a safety shutdown for a possible runaway temperature, so we treat it seriously. Turn the oven off, let it cool, and do not keep using it if the code comes back.

Can resetting fix F10?

A power reset can clear a one-time reading error. If F10 returns, the sensor and relay have to be tested, and we do that before any part is replaced.

Is F10 worth repairing on an older range?

Many times the cause is a sensor, and that repair is modest. Should the control board be involved, you get the price in writing and our candid opinion on whether the range deserves it.

Book a visit

Still seeing F10?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150