Error code · Range

Electrolux Range Code F26: Communication Error with the Mini Oven Control

Medium · inspection needed

Code: F26
Appliance: Range
Brand: Electrolux
Warranty: 30-day workmanship

What F26 means

F26 on Electrolux electric ranges is a communication error, grouped in the owner guide with F3 and F20. It means the oven controller lost contact with another control in the range. Be aware that on double wall ovens the same code has a different meaning, which is a missing lower oven select signal, so tell us what type of appliance you own. The oven may stop and show the code. Many of these ranges are older.

Common causes of F26

Wiring and connectors between the controls
The secondary control board
Oven control board

✓ One safe check you can try

1. Stop power to the range for up to half a minute, either by plug or by breaker. 2. Restore power and see whether F26 returns. 3. Note whether the oven, the cooktop or both are affected. 4. If F26 shows up again, give us a call.

! Why to stop there

F26 says a link is broken, but not which part broke it, so we test the connections before the boards.
We confirm what type of appliance you have, because the meaning differs on a double wall oven.
The price is given on paper first, and we are honest when the range is too old to be worth repairing.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

SAb / SbWhat SAb and Sb Mean on an Electrolux Range SFSF After a Power Outage in Sabbath Mode on an Electrolux Range F30Electrolux Range Code F30: Open Oven Temperature Probe F31Electrolux Range Code F31: Shorted Oven Temperature Probe F40 / F41Electrolux Range Codes F40 and F41: Cooktop Lockout F90Electrolux Range F90 Code: The Door Lock Motor Needs a Look F91Electrolux Range Shows F91 and the Door Will Not Lock Right F92F92 on an Electrolux Range: Door Lock Circuit Reading

F26F26 questions

Why does F26 mean something else on a wall oven?

On a double wall oven it reports a missing lower oven select signal. On a range it is a communication error, so we confirm which one you have.

Will the stovetop still work?

Possibly, but we cannot promise it for every range. Tell us what still works and we will plan the check around that. We look at how the code behaves on your appliance before deciding what to test.

Can a power reset fix it?

A reset can clear a one-time glitch. If F26 returns, the link needs to be tested, which we do before any part is suggested. We would rather confirm the cause than guess at a part.

Book a visit

Still seeing F26?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150