Error code · Dishwasher

Electrolux Dishwasher Code i00: Low Mains Voltage

Medium · inspection needed

Code: i00
Appliance: Dishwasher
Brand: Electrolux
Warranty: 30-day workmanship

What i00 means

The i00 message on Electrolux built-in dishwashers of the Durham platform, the ICON, EI24CD35, EI24ID30, EI24ID50, EW24ID70 and EW24ID80 models means the incoming mains voltage is too low. While the voltage is low, the dishwasher suspends its working loads, and it resumes once the voltage climbs back up. The message is not stored, so it goes away when the supply recovers. You may see the cycle pause with i00 showing, and then carry on without anyone touching it.

Common causes of i00

Low voltage on the house circuit
Heavy load on the same circuit starting up
Loose connection at the dishwasher or the outlet box
Supply issue from the utility

✓ One safe check you can try

1. Notice whether other appliances were starting at the same time, such as an air conditioner. 2. Check whether lights in the house dim when i00 appears. 3. Let the dishwasher recover and finish by itself. 4. If i00 appears often, write down when and call us.

! Why to stop there

Because the message is not stored, it can disappear before we arrive, so notes about when it happens help us a great deal.
We check the connection at the dishwasher and test the supply there.
If the supply is the cause, we tell you plainly, so you can call an electrician.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

PRESS STARTElectrolux Dishwasher Message PRESS START: Close the Door LOCElectrolux Dishwasher Message LOC: Controls Locked PFElectrolux Dishwasher Message PF: Power Was Interrupted i60Electrolux Dishwasher Code i60: Water Not Heating Up i61Electrolux Dishwasher Code i61: Water Too Hot i70Electrolux Dishwasher Code i70: Temperature Sensor Out of Range i80 / i81Electrolux Dishwasher Codes i80 and i81: Automatic Door Opener i90Electrolux Dishwasher Code i90: Control Memory or Display Data Error

i00i00 questions

Will the dishwasher restart on its own?

Yes. It resumes once the voltage returns to a safe level. Yes, it picks up again by itself once the voltage returns to a safe level, and nothing needs to be reset by you.

Is the dishwasher damaged?

Not by this message alone. It is protecting itself from weak power. The message is only the dishwasher protecting itself from weak power, and it does not mean any part of it has been damaged by the low supply.

What if it keeps happening?

Then something on the circuit is pulling the voltage down, or a connection is loose. We test at the dishwasher to find out. Then something else on the circuit may be pulling the voltage down, or a connection may be loose, and we test at the dishwasher to find out.

Book a visit

Still seeing i00?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150