Error code · Cooktop

Electrolux Wave-Touch Cooktop Code E – XX: Timer Display Error

Medium · inspection needed

Code: E - XX
Appliance: Cooktop
Brand: Electrolux
Warranty: 30-day workmanship

What E - XX means

On Electrolux Wave-Touch electric cooktops such as the EW30EC55GS and EW36EC55GS, an error shows in the minute timer display as the letter E, a dash and then a two-digit number, flashing in turn. That number is the specific error the cooktop has recorded, and it matters when you call us. While it shows, the cooktop may not heat as normal, depending on which part of the cooktop is affected.

Common causes of E - XX

Control board reading for the recorded error
Touch panel and its connection
Element or sensor circuit tied to the number
Line voltage to the cooktop

✓ One safe check you can try

1. Turn off every zone and let the glass cool. 2. Turn the cooktop's power off and back on at the supply. 3. If the display shows E - and a number again, write down the number exactly. 4. Contact us with that number.

! Why to stop there

A power cycle clears a one-time error but cannot show what caused it, so we read the stored number and test that circuit.
The two digits tell us where to start, but we confirm by testing before we order a part.
You approve the price in writing, and the repair carries a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

HEElectrolux Cooktop Code HE: Hot Element Warning Sb / SFElectrolux IQ-Touch Cooktop Codes Sb and SF: Sabbath Mode E 71Electrolux ICON Induction Cooktop Code E 71: Generator Timing Lost E 74Electrolux ICON Induction Cooktop Code E 74: Generator Link Error E 76 / E 77Electrolux ICON Induction Cooktop Code E 76 / E 77: Communication or Heat Sink Sensor E XX (hybrid)Electrolux Wave-Touch Hybrid Cooktop Code E XX: Zone Lights Plus Timer Digits E0 XXElectrolux ICON Induction Cooktop Code E0 XX: Two-Zone Error Readout ErElectrolux Knob Cooktop Code Er: A Knob Is Still on

E - XXE - XX questions

Why does the number flash after the E?

The cooktop shows the letter first and then the digits in turn, so you can read it on the small display. Write the digits down in order.

Does every number mean a repair?

Not always. A one-time error may clear after a power cycle. If it comes back, we test the circuit it points to. If the number comes back after you switch the power off and on, that tells us the cause is still there and needs testing.

Can I use the cooktop meanwhile?

If the cooktop heats normally after a restart, you may use it carefully, but call us if the number returns. Keep an eye on it while you cook, and stop if the code returns, because a repeat means something needs checking before further use.

Book a visit

Still seeing E - XX?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150