Electrolux Ice Maker Code E4: Compressor Never Cycled Off
E4 is an error-log entry on Electrolux ICON and IQ under-counter ice makers such as the EI15IM55GS, E15IM60GSS and E15IM60GPS. It records that the compressor ran at 100 percent between two defrosts, which means it never…
- Code
- E4
- Appliance
- Ice Maker
- Brand
- Electrolux
- Warranty
- 30-day workmanship
What E4 means
E4 is an error-log entry on Electrolux ICON and IQ under-counter ice makers such as the EI15IM55GS, E15IM60GSS and E15IM60GPS. It records that the compressor ran at 100 percent between two defrosts, which means it never got a break. The owner cannot see E4 on the display, and it is read in service mode. It suggests the unit is working very hard to keep cold, and you may notice slow or soft ice, or a compressor that runs all the time.
Common causes of E4
- Dirty condenser or blocked airflow
- Refrigeration system not cooling well
- Ambient heat around the unit
- Sensor or control that misreads the cycle
1. Make sure nothing is blocking the air openings around the unit. 2. Check that the door is fully closed and the room is not unusually hot. 3. Notice whether the ice is soft or slow and how long the compressor runs. 4. Call us if the unit seems to run non-stop.
- Constant running can come from airflow, a sensor or the cooling system, and the log cannot tell which, so we check each.
- We look at the condenser and the airflow around the unit.
- We quote in writing before we start, and the repair has a 30-day warranty.
Other Ice Maker codes
What does 100 percent runtime mean?
The compressor ran continuously between two defrost cycles without ever shutting off. A healthy unit cycles on and off, so a compressor that never gets a break is worth a look.
Is this urgent?
Not usually, but it strains the unit. If the ice is soft or the unit never stops running, call us before the extra wear turns into a larger repair.
Can a hot room cause it?
Yes, high surrounding heat or blocked airflow makes the compressor work harder, so we check the surroundings and the condenser area before we look at the cooling system.
Still seeing E4?
A technician diagnoses it on site and gives you the price in writing before any work starts.