Error code · Dishwasher

Electrolux Dishwasher Code iF0: Overfilling

High · stop use, call now

Code: iF0
Appliance: Dishwasher
Brand: Electrolux
Warranty: 30-day workmanship

What iF0 means

The iF0 code on Electrolux ICON dishwashers such as the EI24ID50QS and EW24ID70QT means the total fill time was exceeded, so the dishwasher took in more water than it should. The manufacturer groups it with i20 and i40, which point to clogged filters or a restricted drain. You may see water sitting high in the tub, or a cycle that stops while water remains.

Common causes of iF0

Clogged filter or restricted drain
Water inlet valve letting water through
Pressure sensor misreading the level
Drain pump not emptying the tub

✓ One safe check you can try

1. Press Cancel and look at the tub. If water is high, bail it out with a cup. 2. Clean the filter and sump by hand. 3. Check the drain hose for a kink and that the sink drain is clear. 4. If iF0 comes back, turn off the water supply to the dishwasher and call us.

! Why to stop there

Overfilling can come from a drain that is slow, a valve that leaks through or a sensor that reads wrong, so we test all three.
We check how the tub fills and drains under power.
You get the price in writing first, and the repair carries a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

PRESS STARTElectrolux Dishwasher Message PRESS START: Close the Door i90Electrolux Dishwasher Code i90: Control Memory or Display Data Error iB0Electrolux Dishwasher Code iB0: Sensor Calibration Not Finished iC0Electrolux Dishwasher Code iC0: Display Not Communicating iC1 / iC2Electrolux Dishwasher Codes iC1 and iC2: Internal Communication iC3Electrolux Dishwasher Code iC3: Power and Motor Boards Not Talking iD0 / iD1Electrolux Dishwasher Codes iD0 and iD1: Motor Speed Signal Missing iE0Electrolux Dishwasher Code iE0: Spray Arm Level Not Reached

iF0iF0 questions

What does iF0 mean for my floor?

Water can spill if the tub overfills. Turning off the supply valve under the sink limits the risk until we arrive.

Is a slow drain the only cause?

It is common, but a fill valve that does not close fully can produce the same message.

Can I run the dishwasher again?

Only after clearing the filter and drain. If the code returns, please leave it off.

Book a visit

Still seeing iF0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150