Electrolux Dishwasher Code i5A: Pump Overload
An i5A on an Electrolux ICON dishwasher, such as the EI24ID50QS or EW24ID70QT, is an overload or over-temperature message for the pumps. The control saw the wash pump pull about 0.68 amps or the drain pump…
- Code
- i5A
- Appliance
- Dishwasher
- Brand
- Electrolux
- Warranty
- 30-day workmanship
What i5A means
An i5A on an Electrolux ICON dishwasher, such as the EI24ID50QS or EW24ID70QT, is an overload or over-temperature message for the pumps. The control saw the wash pump pull about 0.68 amps or the drain pump pull about 0.55 amps for ten seconds, which is too long. The cycle stops to protect the motor, and the dishwasher may feel warm near the base.
Common causes of i5A
- Wash or drain pump working too hard
- Debris binding a pump
- Motor winding overheating
- Motor control board current sensing
1. Press Cancel and leave the door open until the pumps have cooled. 2. Clean the filter and sump by hand, looking for glass or small objects. 3. Check that the drain hose is not kinked behind the unit. 4. Shut the door firmly and start a brief test cycle. If i5A returns, call us.
- The code does not say which pump overloaded, so we test both under load.
- We check the drain path, since a blocked drain makes the drain pump work harder.
- We tell you the price in writing first, and repairs carry our 30-day warranty.
Other Dishwasher codes
What does i5A stand for?
It is an overload or over-temperature message. The control stopped the cycle because a pump drew more current than it should for ten seconds.
Should I wait before trying again?
Yes. Giving the dishwasher time with the door open lets the motors cool. If the code returns right away, there is likely a jam or a worn pump.
Can a kinked hose cause it?
It can add strain to the drain pump. Straightening a visible kink is safe, and it is one of the first things we look at too.
Still seeing i5A?
A technician diagnoses it on site and gives you the price in writing before any work starts.