EIMED60LT
Electrolux EIMED60LT Electric Dryer Repair
Most common issues on this model
- Heating element and safety parts
- Steam hose and water supply
- Vent and lint path
- Door switch and belt
The EIMED60LT is an electric front-load dryer from Electrolux with IQ-Touch controls and Perfect Steam. The LT ending is the finish code, and the item lists revision EIMED60LT2. It has been discontinued, so most we see are older dryers still in daily use in Houston homes.
On this type of dryer, a visit follows the complaint. If it will not heat, we test the element and safety parts. If steam never starts, we trace the hose and shutoff. If the drum stops or the dryer will not start, the door switch and belt are next. The vent is measured in every case, because blocked airflow causes more trouble than most owners expect.
We order from the revision on your rating plate so the part fits. The quote comes before the repair, and thirty days of workmanship coverage follows it. If it is not worth repairing, we will be the first to tell you.
Key features
- Electric front-load dryer with IQ-Touch controls
- Perfect Steam, 8.0 cu. ft. drum
- Finish code LT
- Revision EIMED60LT2
Error codes this model can show
Why is the revision number on the EIMED60LT important?
The item shows revision EIMED60LT2, and revision changes can affect control and wiring parts. We match parts to the number on your label to avoid ordering the wrong one.
My dryer stops mid-cycle and the drum is hot. What is happening?
Heat that builds up usually means poor airflow, which trips a safety part. We clean the lint path and the vent, then test the thermal parts and the element.
Does steam need to be used for the dryer to work?
No. Normal cycles run without it. If steam cycles fail, we check the water hose and valve, which is a separate fix from heating or drum problems.
Book repair for your EIMED60LT
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.