EIMGD55QT
Electrolux EIMGD55QT Gas Dryer Repair
Most common issues on this model
- Igniter and gas valve
- Steam water hose
- Vent restriction and limiter
- Gas shutoff and connector
The EIMGD55QT is the gas version of the Q-generation IQ-Touch dryer, finished in QT. It belongs to the steam-capable EIMGD line, and the item lists the revision build EIMGD55QT0. Electrolux has discontinued it, but we still see these dryers in Houston homes, usually connected to a gas line in a garage or utility room.
A visit starts at the burner. We watch the igniter, listen for the valve, and check how steady the flame is. Next we look at the exhaust for lint and crushing, because the limiter shuts a gas burner down when air cannot escape. If steam cycles are skipped, we follow the water hose and its valve.
If you ever smell gas, close the valve and call the gas company. When we come, the revision on the rating plate decides what we order. You hear the cost first, and our labor carries a 30-day guarantee.
Key features
- Gas front-load dryer with IQ-Touch controls
- Perfect Steam, in the steam-capable EIMGD line
- Finish code QT
- Revision build EIMGD55QT0
Error codes this model can show
What is the revision EIMGD55QT0?
It is the production build listed for this dryer. Revisions can change control and wiring parts, so we read the label and match what we order to your exact build.
My gas dryer clicks and nothing lights. What do you test?
We check the igniter, the valve coils and the gas supply. A weak igniter can glow but fail to open the valve, so we test the whole sequence instead of swapping a single part.
Is steam something I need to maintain?
Mostly it needs a water supply that is open and a hose that is not kinked. When steam stops, those are our first checks before we open the dryer.
Book repair for your EIMGD55QT
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.