Error code · Dryer

Electrolux Dryer Code E61: Heater Relay

Medium · inspection needed

Code: E61
Appliance: Dryer
Brand: Electrolux
Warranty: 30-day workmanship

What E61 means

E61 on Electrolux Wave-Touch and IQ-Touch dryers such as the EIED55HIW, EIGD55HIW, EWED65HSS and EWMED65HIW reports a Heater Relay failure. One or more of the heater relays on the board, labeled RL5, RL6 and RL7, is stuck open or stuck closed, or the wiring is defective. The dryer might tumble without heating, or it might heat when it should not. These are older dryers still in many homes.

Common causes of E61

Heater relay on the control board
Heater wiring
Heating element circuit

✓ One safe check you can try

1. Stop the cycle and open the door. 2. Check that the lint screen is clean and the vent is not crushed. 3. Feel whether the clothes warm up on a short timed cycle. 4. If E61 returns or the dryer heats unexpectedly, stop and call us.

! Why to stop there

A stuck relay can leave the heater on or off, so we test the relays and the heater circuit.
We look for burned wire ends at the connections.
We say plainly when a repair is not worth it on an older dryer, and you approve a written price first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

EF8Electrolux Dryer Code EF8: Key Stuck H2 / B2Electrolux Dryer Codes H2 and B2: Power Supply Issue H4 / B4Electrolux Dryer Codes H4 and B4: Incorrect Wiring EF1Electrolux Dryer Code EF1: Ventilation Blockage EF3Electrolux Wave-Touch Dryer Code EF3: Max Timeout Timer E64Electrolux Dryer Code E64: Heater Open Circuit E65Electrolux Dryer Code E65: High Limit Tripping Too Often E66Electrolux Dryer Code E66: Thermal Limiter Open

E61E61 questions

Can E61 make the dryer overheat?

If a relay is stuck closed, the heater could stay on. That is why we do not suggest running it repeatedly.

Why would there be no heat?

A relay stuck open stops power reaching the heater. The tumbling still works.

Is a board replacement always needed?

Not always. If the wiring is the problem, it is a smaller repair. We test before quoting.

Book a visit

Still seeing E61?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150