Error code · Dryer

Electrolux Dryer Codes E92 and E93: Board Mismatch or Data Error

High · stop use, call now

Code: E92 / E93
Appliance: Dryer
Brand: Electrolux
Warranty: 30-day workmanship

What E92 / E93 means

E92 and E93 relate to the control and interface boards on Electrolux Wave-Touch and IQ-Touch dryers such as the EIED55HIW, EIGD55HIW, EWED65HSS and EWMED65HIW. An E92 means incompatible protocol, so the control board and the interface board do not match. An E93 is a machine configuration checksum error, meaning the stored settings are wrong. The chart suggests confirming the correct console and then replacing a board.

Common causes of E92 / E93

Wrong or mismatched interface board
Control board configuration data
Wiring between the boards

✓ One safe check you can try

1. Close the door and press the power button. 2. Note whether the display responds at all. 3. If the console was replaced recently, tell us which part was installed. 4. Call us with the exact code.

! Why to stop there

A mismatch means the right parts have to be confirmed before anything is replaced, so we check the part numbers.
We test the wiring between the boards.
We say plainly when a repair is not worth it on an older dryer, and you approve the price first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

H4 / B4Electrolux Dryer Codes H4 and B4: Incorrect Wiring EF1Electrolux Dryer Code EF1: Ventilation Blockage EF3Electrolux Wave-Touch Dryer Code EF3: Max Timeout Timer EF8Electrolux Dryer Code EF8: Key Stuck H2 / B2Electrolux Dryer Codes H2 and B2: Power Supply Issue E64Electrolux Dryer Code E64: Heater Open Circuit E65Electrolux Dryer Code E65: High Limit Tripping Too Often E66Electrolux Dryer Code E66: Thermal Limiter Open

E92 / E93E92 / E93 questions

Why would boards not match?

A replacement board may not be the correct version for the console.

What is a checksum error?

The stored settings do not add up to the expected value, so the control cannot trust them.

Can you fix it without a new board?

Sometimes a connection is the problem. We find out first.

Book a visit

Still seeing E92 / E93?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150