Error code · Washer

Electrolux Washer Codes E5D and E5E: Board Communication

Medium · inspection needed

Code: E5D / E5E
Appliance: Washer
Brand: Electrolux
Warranty: 30-day workmanship

What E5D / E5E means

Both E5D and E5E report a communication problem inside Electrolux Wave-Touch and IQ-Touch washers like the EWFLW65HSS and EIFLW55HMB, where the main control board and the motor control board stop exchanging information properly. The display shows E5D or E5E and the cycle stops. Houston still has many of these older front-loaders in daily use. We can repair yours, and we will say so if the cost is not justified.

Common causes of E5D / E5E

The wiring harness between the main board and the motor control board
A loose connector at either board
The main control board
The motor control board

✓ One safe check you can try

1. Press the power key to turn the washer off, then give it about a minute. 2. Turn it on again and run one short cycle. 3. Note whether the display shows E5D or E5E, and when in the cycle it appears. 4. If either code returns, do not keep trying. Call us with what you noted.

! Why to stop there

The two codes only tell us the boards are out of contact, so the harness and plugs get checked ahead of either board.
A board is replaced only when the tests point to it.
Once you approve the written price, our work on the repair is guaranteed for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SU dSElectrolux Washer Message SU dS: Too Many Suds Detected TOO MUCH DETERGENTElectrolux Washer Message "TOO MUCH DETERGENT" EF1Electrolux Washer Code EF1: Clogged Drain Pump EF2Electrolux Washer Code EF2: Too Much Detergent EF5Electrolux Washer EF5: Hot and Cold Water Mix-Up EF8Electrolux Washer Code EF8: Stuck Key HO SEElectrolux Washer Message HO SE: Hoses on the Wrong Inlets LOCElectrolux Washer Message LOC: Control Lock Is On

E5D / E5EE5D / E5E questions

Do E5D and E5E mean different things?

The manufacturer words them the same way, a communication problem between the main board and the motor control board. On the visit we handle them identically, wiring first and then each board.

Can switching the washer off clear the code?

Sometimes a short power-off lets the boards link up again. When the code comes back, a loose plug or one of the boards is the likely cause, and we test to find out which.

Which board is the likely culprit?

The code alone does not say. We test the harness between the boards, then the main board, then the motor control board, and explain the result before you approve a part.

Book a visit

Still seeing E5D / E5E?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150