Error code · Washer

Electrolux Washer Code EF1: Clogged Drain Pump

Medium · inspection needed

Code: EF1
Appliance: Washer
Brand: Electrolux
Warranty: 30-day workmanship

What EF1 means

EF1 means the drain pump is clogged on front-load Electrolux Wave-Touch and IQ-Touch washers such as the EWFLW65HSS and EIFLW55HMB. The washer is trying to empty the tub and cannot move the water out. You will see EF1 on the display, and the drum may still hold water or the cycle may stall at the drain step. Many Houston homes still have an older machine like this one, and we repair it or tell you honestly when it is time for a new one.

Common causes of EF1

Lint, coins, socks or small items in the drain pump
A kinked or blocked drain hose
A clogged standpipe or house drain
The drain pump itself, if the blockage is cleared

✓ One safe check you can try

1. Turn the washer off and check that the drain hose behind it is not kinked or crushed. 2. Make sure the hose is not pushed too far down the standpipe. 3. Look for items that may have come out of pockets. 4. If EF1 returns or water stays in the drum, stop and call us.

! Why to stop there

A clog is a condition and not a failed part, so we find where the water stops before we change anything.
We clear the drain path and test the pump afterward.
Our price is written down and agreed first, and the work is covered by a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SU dSElectrolux Washer Message SU dS: Too Many Suds Detected TOO MUCH DETERGENTElectrolux Washer Message "TOO MUCH DETERGENT" E93 / E97Electrolux Washer E93 / E97: Console or Main Board Control Problem E94Electrolux Washer Code E94: Main Board Control Problem E95Electrolux Washer E95: Memory Chip Communication E98 / E9FElectrolux Washer Codes E98 and E9F: Console Control and Communication EA1Electrolux Washer Code EA1: Power Frequency Outside Its Limits EA2 / EA3Electrolux Washer EA2 and EA3: Supply Voltage Too High or Too Low

EF1EF1 questions

Is there water that I can see?

There may be water left in the drum. Be careful when you open the door, since it can run out onto the floor. Towels and a shallow pan help, and we can drain it for you on the visit.

Can I clear the pump myself?

The pump filter location varies, and the owner steps in your manual are the safest guide. If you are not sure, call us rather than taking things apart, especially with water still in the drum.

Does EF1 mean I need a new pump?

Not usually. Most of the time something is blocking the pump or the hose. We clear the path first and test the pump afterward, so a new pump is only quoted if it is really needed.

Book a visit

Still seeing EF1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150