Error code · Washer

Electrolux Washer E95: Memory Chip Communication

Medium · inspection needed

Code: E95
Appliance: Washer
Brand: Electrolux
Warranty: 30-day workmanship

What E95 means

E95 on Electrolux Wave-Touch and IQ-Touch washers, including the EWFLW65HSS and EIFLW55HMB, tells you the microprocessor cannot exchange data with its external memory chip, an EEPROM that stores the washer's settings. The control cannot read its stored program data. You will see E95 on the display and the washer may refuse to start. This is an older washer that many Houston households still run, and we say honestly when a repair is not worth the cost.

Common causes of E95

The main control board and its memory chip
Power to the board
Connectors to the board

✓ One safe check you can try

1. Switch the washer off and unplug it for a few minutes. 2. Plug it in again and power it on. 3. See whether the display lights normally and the buttons answer. 4. If E95 appears again, leave the washer off and call us.

! Why to stop there

The memory chip is soldered to the control board, so we first rule out a loose connector or poor input power.
When the board is the cause, you hear the cost compared with the washer's age before deciding.
Work starts after you approve the written quote, and a 30-day warranty covers our labor.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SU dSElectrolux Washer Message SU dS: Too Many Suds Detected TOO MUCH DETERGENTElectrolux Washer Message "TOO MUCH DETERGENT" HO SEElectrolux Washer Message HO SE: Hoses on the Wrong Inlets LOCElectrolux Washer Message LOC: Control Lock Is On NO WATERElectrolux Washer Message NO WATER: Install Cycle Cannot Fill E93 / E97Electrolux Washer E93 / E97: Console or Main Board Control Problem E94Electrolux Washer Code E94: Main Board Control Problem E98 / E9FElectrolux Washer Codes E98 and E9F: Console Control and Communication

E95E95 questions

What is this chip?

It is a small part on the board that remembers the washer's settings and program data. When the processor cannot reach it, the washer loses what it needs to run, and E95 appears.

Does unplugging help?

Now and then a power-off clears a one-time glitch. If E95 returns, that points to the board itself, and tests confirm it before we recommend replacing anything.

Is a replacement board costly?

The price depends on the model. You get the number in writing first, and we tell you honestly when a washer this old is not worth repairing.

Book a visit

Still seeing E95?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150