Error code · Dryer

Electrolux Wave-Touch Dryer Code EA5: Main Voltage Sensing

High · stop use, call now

Code: EA5
Appliance: Dryer
Brand: Electrolux
Warranty: 30-day workmanship

What EA5 means

The EA5 code appears on Electrolux Wave-Touch and IQ-Touch front-load dryers such as the EIED55HIW, EIGD55HIW, EWED65HSS and EWMED65HIW. It is the main voltage sensing message, and it points to the control board's own circuit that measures the incoming power. Unlike EA2 or EA3, it does not say the voltage is high or low, only that the board cannot read it correctly. The dryer stops and will not start a cycle. Dryers of this generation are well over a decade old, yet many are still in daily use around Houston.

Common causes of EA5

Main control board voltage sensing circuit
Power connections feeding the board
Supply voltage at the outlet

✓ One safe check you can try

1. Press Stop and unplug the dryer for a minute. 2. Check that both halves of the dryer breaker are fully on. 3. Plug the dryer in and start a short cycle. 4. If EA5 comes back right away, stop there and call us. Leave the cabinet closed, since the board is not something to inspect yourself.

! Why to stop there

The code points to the board's sensing circuit, but a poor connection or supply can look the same, so we rule those out first.
We test the supply and the connections going into the control before we call the board the cause.
A board is a major repair on a dryer this old, so we put the price in writing and give you our honest opinion before you commit.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

H2 / B2Electrolux Dryer Codes H2 and B2: Power Supply Issue H4 / B4Electrolux Dryer Codes H4 and B4: Incorrect Wiring EF1Electrolux Dryer Code EF1: Ventilation Blockage EF3Electrolux Wave-Touch Dryer Code EF3: Max Timeout Timer EF8Electrolux Dryer Code EF8: Key Stuck E64Electrolux Dryer Code E64: Heater Open Circuit E65Electrolux Dryer Code E65: High Limit Tripping Too Often E66Electrolux Dryer Code E66: Thermal Limiter Open

EA5EA5 questions

Is EA5 the same as EA2 or EA3?

No. EA2 and EA3 say the voltage is too high or too low. EA5 says the board's voltage sensing itself is not working, so the cause is usually on the board side.

Will a power surge cause it?

A surge can stress a control board, but we cannot tell that from the code alone. We check the supply and the board before we say what happened.

Should I replace the dryer instead?

It depends on the age and what we find. We give you a written price for the repair, and we tell you honestly when replacing the dryer is the better choice.

Book a visit

Still seeing EA5?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150