Error code · Washer

Electrolux Washer E68: Heater Leakage or Open Fuse

High · stop use, call now

Code: E68
Appliance: Washer
Brand: Electrolux
Warranty: 30-day workmanship

What E68 means

E68 on Electrolux front-load models in the Wave-Touch and IQ-Touch series, including the EWFLW65HSS and EIFLW55HMB, tells you that the control found current leaking to ground at the heater, or that a fuse in the heater circuit has opened. Because it involves electricity and water, we treat it carefully. You will see E68 and the washer stops. Washers of this age are still in use all over Houston, and we say clearly when repairing one is not the best choice.

Common causes of E68

The heating element, which can leak current to ground
The heater wiring and connectors
The fuse in the heater circuit
The main control board

✓ One safe check you can try

1. Turn the washer off and unplug it from the wall outlet. 2. Do not run it again, and keep water and laundry away from the back of the cabinet. 3. Leave the door closed and the panels in place. 4. Call us so we can test the heater circuit safely.

! Why to stop there

Leakage to ground is a safety item, so we test the heater and its wiring before the washer runs again.
We check the circuit fuse as part of the test.
The price is put in writing before we start, and our workmanship is warranted for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SU dSElectrolux Washer Message SU dS: Too Many Suds Detected TOO MUCH DETERGENTElectrolux Washer Message "TOO MUCH DETERGENT" EA5 / EAEElectrolux Washer Codes EA5 and EAE: Voltage and Line Relay Sensing EF1Electrolux Washer Code EF1: Clogged Drain Pump EF2Electrolux Washer Code EF2: Too Much Detergent EF5Electrolux Washer EF5: Hot and Cold Water Mix-Up EF8Electrolux Washer Code EF8: Stuck Key HO SEElectrolux Washer Message HO SE: Hoses on the Wrong Inlets

E68E68 questions

Is E68 dangerous?

It involves current leaking to ground, so we do not want the washer run until it has been tested. Unplug it, leave it alone and call us. We will test the heater circuit safely.

Does an opened fuse mean it is just a fuse?

A fuse usually opens for a reason, such as a leaking heater or a wiring problem. We find that reason before replacing anything, so a new fuse does not simply open again.

Can I use the washer without hot water?

Not safely. The control may keep stopping, and the heater circuit still needs to be checked. Keep the washer unplugged until we have looked at it, especially if there has been any water around it.

Book a visit

Still seeing E68?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 979-9150